HL600-L-HP

Horizontal press with longitudinal placement of binding needles

The HL 600-HP horizontal press is designed according to the latest trends in this field of mechanical engineering. We produce 3 types, namely HL 600-HI, HL 600-H-II and HL 600-H-III, which differ from one another primarily in the size of the loading area, their lifting capacity and their hourly output.

This machine is the result of our more than 20 years of experience in the production of pressing technology, which is a sufficient guarantee of the quality of the products and services supplied by us.

We provide non-stop technical support (including service) for the press and offer the possibility to connect to the press software remotely via the Internet.

The robust design made of high-quality steel sheets and profiles guarantees the strength and stability of the machine. The machine is driven by a hydraulic unit led from the electrical control cabinet through a highly sophisticated electronic control system. The control of the press and all its accessories and components can be managed from one central control panel with a large, abrasion-resistant colour touch screen. This control method allows the press to be very variably adapted to the specific needs of each customer.

Another advantage of the press is the possibility to equip it with many additional accessories and components (with a compression or pre-compression flap, conveyors, HVAC equipment, a PET bottle perforator, a cardboard shredder, a vibrator, a tipping device for various types of containers and cages, hoppers, automatic start-up systems, GSM modules etc.)

The arrangement of the press itself is also variable, where it is possible to choose the position of the hydraulic unit, control panel, and strapping system, the size of the strapping wire unwinding stand, etc. The press and all the other offered accessories meet all the latest operational safety requirements.

The horizontal press HL 600-HP is designed for continuous, fully automatic pressing of materials that are compressed into the narrow outlet of the press (channel) by a compression plate after the compression chamber is filled and are then strapped into compact bales by the automatic strapping system. This significantly reduces the volume of the material, thus also significant reducing the cost of its transport and storage.

 

Pressing forcet60
Pressing pressurekg/cm27,5
Dimensions of the filling holemm1100 x 1500
Size outlet duckmm750 x 1100
Lift volumem31,6
Output per hourm3/hod
Cycle times30
Wire bindingAutomatic horizontal 4x
Bale lenght600 to 1600 optional
Hydraulic tank volumem3350
Expected mass power:t/h
35 kg/m3 (carton)4,2
60 kg/m3 (mixed paper)6,9
Power input/Voltage/Fuse *with accessorieskW/V/A30/3×400/80C
Masskg9500
Dimensions of the machinemm2650 x 9600 x 2600
Transport dimensionsmm2650 x 7650 x 2600

Video


Příslušenství


For download


Do you have any questions?














    Each party agrees that the data provided thereby in the scope specified herein may be processed by the organizer as an administrator under Act no. 101/2000 Coll., on personal data protection, as amended, for the purpose of sending out requested messages, offering products and services, and sending information about the organizer's events. The organizer is authorized to provide personal data to its contractual partners for the aforementioned purpose and under the terms of this consent. The data may be processed by third parties. The consent is granted on a voluntary basis and can be revoked in writing at any time at the address of the organizer specified in the contacts.

    Application


    HL600-L-HP

    The HL 600-HP horizontal press is designed according to the latest trends in this field of mechanical engineering. We produce 3 types, namely HL 600-HI, HL 600-H-II and HL 600-H-III, which differ from one another primarily in the size of the loading area, their lifting capacity and their hourly output.

    This machine is the result of our more than 20 years of experience in the production of pressing technology, which is a sufficient guarantee of the quality of the products and services supplied by us.

    We provide non-stop technical support (including service) for the press and offer the possibility to connect to the press software remotely via the Internet.

    The robust design made of high-quality steel sheets and profiles guarantees the strength and stability of the machine. The machine is driven by a hydraulic unit led from the electrical control cabinet through a highly sophisticated electronic control system. The control of the press and all its accessories and components can be managed from one central control panel with a large, abrasion-resistant colour touch screen. This control method allows the press to be very variably adapted to the specific needs of each customer.

    Another advantage of the press is the possibility to equip it with many additional accessories and components (with a compression or pre-compression flap, conveyors, HVAC equipment, a PET bottle perforator, a cardboard shredder, a vibrator, a tipping device for various types of containers and cages, hoppers, automatic start-up systems, GSM modules etc.)

    The arrangement of the press itself is also variable, where it is possible to choose the position of the hydraulic unit, control panel, and strapping system, the size of the strapping wire unwinding stand, etc. The press and all the other offered accessories meet all the latest operational safety requirements.

    The horizontal press HL 600-HP is designed for continuous, fully automatic pressing of materials that are compressed into the narrow outlet of the press (channel) by a compression plate after the compression chamber is filled and are then strapped into compact bales by the automatic strapping system. This significantly reduces the volume of the material, thus also significant reducing the cost of its transport and storage.