HL500-HP

Horizontal press with longitudinal placement of binding needles

The HL 500-HP horizontal press is designed according to the latest trends in this field of mechanical engineering. We produce 3 types, namely HL 500-HI, HL 500-H-II and HL 500-H-III, which differ from one another primarily in the size of the loading area, their lifting capacity and their hourly output.

This machine is the result of our more than 20 years of experience in the production of pressing technology, which is a sufficient guarantee of the quality of the products and services supplied by us.

We provide non-stop technical support (including service) for the press and offer the possibility to connect to the press software remotely via the Internet.

The robust design made of high-quality steel sheets and profiles guarantees the strength and stability of the machine. The machine is driven by a hydraulic unit led from the electrical control cabinet through a highly sophisticated electronic control system. The control of the press and all its accessories and components can be managed from one central control panel with a large, abrasion-resistant colour touch screen. This control method allows the press to be very variably adapted to the specific needs of each customer.

Another advantage of the press is the possibility to equip it with many additional accessories and components (with a compression or pre-compression flap, conveyors, HVAC equipment, a PET bottle perforator, a cardboard shredder, a vibrator, a tipping device for various types of containers and cages, hoppers, automatic start-up systems, GSM modules etc.)

The arrangement of the press itself is also variable, where it is possible to choose the position of the hydraulic unit, control panel, and strapping system, the size of the strapping wire unwinding stand, etc. The press and all the other offered accessories meet all the latest operational safety requirements.

The horizontal press HL 500-HP is designed for continuous, fully automatic pressing of materials that are compressed into the narrow outlet of the press (channel) by a compression plate after the compression chamber is filled and are then strapped into compact bales by the automatic strapping system. This significantly reduces the volume of the material, thus also significant reducing the cost of its transport and storage.

 

Model line
IIIIII – 15 kW
Pressing force(t)505050
Pressing pressure(kg/cm2)76,56,5
Dimensions of the filling hole(mm)750 x 950800 x 1200800 x 1400
Size outlet duck(mm)750 x 950800 x 1000800 x 1000
Lift volume(m3)11,41,6
Output per hour(m3/hod.)70/8090/105100/ 120
Cycle time(s)354045
Wire bindingAutomatic horizontal 4x
Bale lenght(mm)Selectable 600 až 1600
Hydraulic tank volume(m3)130
Expected mass power 35 kg/m (carton)

60 kg/m (mixxed paper)

(t/h)2,54,03,55,03,55,5
Power input/Voltage/Fuse

*with accessories

(kW/V/A)15/3x 400 /40C(*63C)

Video


Příslušenství


For download


Do you have any questions?














    Each party agrees that the data provided thereby in the scope specified herein may be processed by the organizer as an administrator under Act no. 101/2000 Coll., on personal data protection, as amended, for the purpose of sending out requested messages, offering products and services, and sending information about the organizer's events. The organizer is authorized to provide personal data to its contractual partners for the aforementioned purpose and under the terms of this consent. The data may be processed by third parties. The consent is granted on a voluntary basis and can be revoked in writing at any time at the address of the organizer specified in the contacts.

    Application


    HL500-HP

    The HL 500-HP horizontal press is designed according to the latest trends in this field of mechanical engineering. We produce 3 types, namely HL 500-HI, HL 500-H-II and HL 500-H-III, which differ from one another primarily in the size of the loading area, their lifting capacity and their hourly output.

    This machine is the result of our more than 20 years of experience in the production of pressing technology, which is a sufficient guarantee of the quality of the products and services supplied by us.

    We provide non-stop technical support (including service) for the press and offer the possibility to connect to the press software remotely via the Internet.

    The robust design made of high-quality steel sheets and profiles guarantees the strength and stability of the machine. The machine is driven by a hydraulic unit led from the electrical control cabinet through a highly sophisticated electronic control system. The control of the press and all its accessories and components can be managed from one central control panel with a large, abrasion-resistant colour touch screen. This control method allows the press to be very variably adapted to the specific needs of each customer.

    Another advantage of the press is the possibility to equip it with many additional accessories and components (with a compression or pre-compression flap, conveyors, HVAC equipment, a PET bottle perforator, a cardboard shredder, a vibrator, a tipping device for various types of containers and cages, hoppers, automatic start-up systems, GSM modules etc.)

    The arrangement of the press itself is also variable, where it is possible to choose the position of the hydraulic unit, control panel, and strapping system, the size of the strapping wire unwinding stand, etc. The press and all the other offered accessories meet all the latest operational safety requirements.

    The horizontal press HL 500-HP is designed for continuous, fully automatic pressing of materials that are compressed into the narrow outlet of the press (channel) by a compression plate after the compression chamber is filled and are then strapped into compact bales by the automatic strapping system. This significantly reduces the volume of the material, thus also significant reducing the cost of its transport and storage.